Cable bridge production equipment About Suzhou Tianyuan Equipment Technology Co., Ltd. is the largest cable tray forming machine Jiangsu area's best suppliers. Equipment Technical Requirements Equipment Technical conditions: equipment footprint: 30 × 3.5 × 2.5 (length × width × height) meters. Equipment feed direction: Left right out (to be determined). Voltage parameters 380,50Hz, 3 phase. Air Source: Flow of 0.5m3 / min; pressure 0-0.7MPa. Hydraulic oil: 46 # hydraulic oil. Gear oil: 18 # hypoid gear oil. Main technical parameters of rolled strip width: 200-960 mm rolled strip thickness: 0.8 ~ 2.0 mm rolled strip Material: Q235 cold-rolled strip steel / galvanized steel molding punching speed: 6-8m / minute rolling workpiece length: 2000-6000 mm equipment installed capacity: about 34.5KW. Rolled product range of the stamping unit can be rolled a maximum thickness of 2.5mm cable tray, product width from 100 to 600mm, height from 50 to 150mm, different specifications of steel cable tray products. Supply and services provisions of the scope of the equipment supply contract (see Table I), Seller warrants that the provision of equipment for new, advanced, mature, complete and secure, and the technical performance of the equipment, the function meet the requirements of technical conditions. Table I: Cantilever automatic cable tray molding equipment supply a range of passive discharge machine without power 2 leveling, punching, five roller leveler and four-poster frame 3 hydraulic punching dies, modular die cut 5, Hydraulic cutting 6 forming the host, 18-22 passes four 5.5kw inverter motor 1-2 mm thick roll material GCr15 7 discharge units, roller 8 electric control cabinet, PLC control cable tray forming machine is limited Suzhou Tianyuan Equipment Technology The company's leading products. Cable tray forming machine product information