Supply windproof valve molding production lines forming a detailed description of the wind valve Production Line Equipment Suzhou Tianyuan Technology Co., Ltd. is the most professional manufacturer damper vent valve molding production line equipment and technology the best suppliers in Jiangsu 1.1 devices require technical conditions: 1.1.1 area: 20 × 3.0 × 2.5 (length × width × height) meters. 1.1.2 feed direction: left right out. 1.1.3 voltage parameters 380V, 50Hz, 3 phase. 1.2 Main technical parameters 1.2.1 rolled strip width: 200 ~ 380 mm 1.2.2 rolled strip thickness: 2.0mm 1.2.3 product length tolerance of each section: 1 ‰ mm 1.2.4 rolled strip material : Low carbon steel, such as Q195, Q235. 1.2.5 Rolling workpiece length: ≥4000mm 1.2.6 equipment installed capacity: about 35KW. 2. Rolled Products range 2.1 forming units can be rolled thickness was 1.2 ~ 2mm 2.2 Rolled Products Size Body thickness control 210MM; sheet thickness of 1.2 ~ 2.0MM steel; flange edge width 25mm / 30mm / 35mm / 40mm range, flanges forming requirements 90 ° right angle damper vent valve molding production line is a technology products Suzhou Tianyuan Equipment Technology Limited.